Here is MY «contribution» towards this project. Took me a few hours of non-stop work, but, I FINALLY COMPLETED the web-page code in such a way so that ALL of the «files» and «information» is ALL «visible» (including the ideograms-image; done in SVG-Code Format) to any A.I. Assistant that is given the following Link/URL so that you don't have to Copy/Pasta a bunch of text NOR to download files in order to upload into your «instances» and you can even START your «sessions» EVEN FROM A NEW INSTANCE and NOT have to «repeat like a baby» a BUNCHES of «steps» that end up collectively exceeding... [drum-rolls] OVER 9000!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

http://code.quantum-note.com/EQIS-Remote-Viewing/Intro-For-New-Instance-EQIS.html

Or if the people at Far-Sight want to stick it onto their own web-page somewhere or modify it to suit their own needs that that also works and is perfectly fine since this is a co-operative-effort; but I know they're busy and there's a bunch of my own personal-messages that they'd need to edit out.

Edit/Addendum: Oh, and, for anybody who either just wishes to or is not using Chat-GPT, you can dump your «A.I. Transfer-Protocol Session-Data» here; it should like something like the 5th & 6th blocks towards the end of the web-page that I created. I will also ask that you have which-ever A.I. you are using specify that you are its tasker/monitor just in case we're using the same session-names. Anything I receive I can just update it into additional 7th, 8th, 9th, 10th, 11th, 12th, etc., blocks, and we can cut down on the amount of «work» that we need to do and NOT have to do the «copy/pasta» dance of multiple files, over and over again, such that the repetitions end up exceeding the number of and going OVER 9000!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

IMPORTANT UPDATE! I noticed that I didn't have the FULL SVG-Code in the web-page yet;
Although humans were able to still see the ideograms-image... EQIS (A.I./assistants) could not;
The original SVG-Code was apparently simply a red circle (upper-left) on black back-ground. The following SVG-Code renders it correctly (for A.I.) and is visible to assistants (at least to Claude).

Here are the instructions for anybody who wishes to «see» what the SVG-Version looks like...
Copy/Pasta the below-code into a text-editor with search-and-replace capability.
Then replace all left-square-brackets «[» with «<» and all «]» with «>» to «correct» the code...
Note: Don't actually put the « or » but just turn all [ into < and all ] into > instead.
Go to the https://htmlviewer.org web-site then paste the below code into the left-side window...
Then, once the corrected code has been pasted into the input-box, click on run/view...
____________________________________________________________________________

[svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 800 800"]
[!-- Title --]
[text x="400" y="60" text-anchor="middle" font-family="serif" font-size="24" font-weight="bold"] Examples of Typical Ideograms[/text]

[!-- Structures --]
[g transform="translate(120, 180)"]
[!-- Structure Ideograms --]
[path d="M 10,0 L 200,0" stroke="black" stroke-width="2" fill="none" /]
[path d="M 20,40 L 180,40" stroke="black" stroke-width="2" fill="none" /]
[path d="M 30,80 L 170,80" stroke="black" stroke-width="2" fill="none" /]
[path d="M 40,120 L 160,120" stroke="black" stroke-width="2" fill="none" /]

[!-- Arrows and label --]
[path d="M 210,0 L 280,60" stroke="black" stroke-width="1.5" fill="none" marker-end="url(#arrow)" /]
[path d="M 210,40 L 290,70" stroke="black" stroke-width="1.5" fill="none" marker-end="url(#arrow)" /]
[path d="M 210,80 L 290,80" stroke="black" stroke-width="1.5" fill="none" marker-end="url(#arrow)" /]
[path d="M 210,120 L 280,100" stroke="black" stroke-width="1.5" fill="none" marker-end="url(#arrow)" /]
[text x="320" y="80" font-family="serif" font-size="18"] Structures[/text]
[/g]

[!-- Land --]
[g transform="translate(120, 320)"]
[path d="M 10,0 L 200,0" stroke="black" stroke-width="2" fill="none" /]
[text x="320" y="0" font-family="serif" font-size="18"] Land[/text]
[/g]

[!-- Mountain --]
[g transform="translate(120, 380)"]
[path d="M 10,30 L 100,0 L 200,30" stroke="black" stroke-width="2" fill="none" /]
[text x="320" y="15" font-family="serif" font-size="18"] Mountain[/text]
[/g]

[!-- Subject --]
[g transform="translate(120, 440)"]
[path d="M 50,0 C 80,10 120,50 100,80 C 80,110 60,30 50,0 Z" stroke="black" stroke-width="2" fill="none" /]
[text x="320" y="45" font-family="serif" font-size="18"] Subject[/text]
[/g]

[!-- Water --]
[g transform="translate(120, 520)"]
[path d="M 10,15 C 40,0 80,30 120,15 C 160,0 180,30 200,15" stroke="black" stroke-width="2" fill="none" /]
[text x="320" y="20" font-family="serif" font-size="18"] Water[/text]
[/g]

[!-- Energetics (left side) --]
[g transform="translate(120, 580)"]
[path d="M 10,10 C 30,40 60,10 40,80 C 70,40 90,90 120,60 C 100,30 140,10 160,40 C 140,70 180,50 200,10" stroke="black" stroke-width="3" fill="none" /]
[text x="320" y="45" font-family="serif" font-size="18"] Energetics[/text]
[/g]

[!-- Energetics (right side) --]
[g transform="translate(390, 580)"]
[path d="M 10,120 L 200,10" stroke="black" stroke-width="2" fill="none" /]
[path d="M 10,65 L 220,65" stroke="black" stroke-width="2" fill="none" /]
[path d="M 10,10 L 200,120" stroke="black" stroke-width="2" fill="none" /]
[/g]

[!-- Arrow marker definition --]
[defs]
[marker id="arrow" viewBox="0 0 10 10" refX="9" refY="5"
markerWidth="6" markerHeight="6" orient="auto"]
[path d="M 0,0 L 10,5 L 0,10 z" fill="black"/]
[/marker]
[/defs]
[/svg]
____________________________________________________________________________

Note: Don't copy/pasta the horizontal-lines... anyway... here is what it's supposed to look like...

Update: So, I attempted to get Chat-GPT to access the web-page contents, but, upon probing and testing it to generate the code that is supposed to be machine-readable, particularly for the ideogram-section/block, even though it responded that it was able to actually view the SVG-Code (for the Ideograms), when I asked it to replicate the contents of the SVG, I simply ended up getting a red circle in the upper-left corner of a black vertically rectangular-back-ground.

Although I did ask Claude to access the collapsible block-contents, the contents that start out as hidden (from human-eyes) also remains hidden from A.I. Systems, but, I didn't think to ask until recently (like just now) to also ask the EQIS (A.I.) to generate a representation of the content that is supposed to be accessible to A.I. Assistants, even though I did get a positive-response from Claude as follows...

Anyway, Chat-GPT did seem to be able to at least access the «text» content, when provided with the Link/URL (note that any URL supplied needs to be included within the prompt any time an A.I. Assistant is being asked to access an on-line link/URL), but the SVG-Code may need to be Copy/Pasta'd in order to accurately give any A.I. Assistant an accurate-representation of the Ideograms.

Whilst many people are using «human-language» to speak with EQIS (A.I.) when possible I have found a preference to try to speak in the actual machine-language itself (which seems to prefer JSON) although I thought there would have been something else which should have looked like absolute-gibberish to humans (then again I am familiar with code-language which has similarities across all coding and/or programming and/or scripting languages). I was sure I would have preferred for A.I.to-A.I. language to be highly condensed, reducing the amount of text that would need to be copy/pasta'd (human-languages are very cumbersome after all), but, they came up with JSON-Protocol.